-
ASTM D92 Manual Cleveland Open Cup Flash Point Tester
Flash point is used in shipping and safety regulations to define flammable and combustible materials. Consult the particular regulation involved for precise definitions of these classifications.
Send Email Details -
KN-40A Channel Point Tester for Gear Oil
KN-40A Channel Point Tester for Gear Oil conforms to FTMS-791B-3465.1 and SH/T 0030. It is used for determination of channel point of gear oil at low temperature. The test consists of storing an Oil sample for 18 hours at a low temperature, cutting a channel in the lubricants with a metal strip and determining whether the lubricants flow together to covet the bottom of the container within 10 seconds.
Send Email Details -
ASTM D4419 Low Temperature Differential Scanning Calorimeter
KN-4419 Low Temperature Differential Scanning Calorimeter conforms to ASTM D4419 Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC). DSC in a convenient and rapid method for determining the temperature limits within which a wax undergoes during transitions. The highest temperature transition is a solid-liquid transition associated with complete melting; it can guide the choice of wax storage and application temperatures. The solid-solid temperature transition is related to the properties of the solid, that is, hardness and blocking temperature.
Send Email Details -
ASTM D5185 Multielement By ICP
22 elements in used lubricating oils and in base oils, and it provides rapid screening of used oils for indications of wear. Test times approximate a few minutes per test specimen, and detectability for most elements is in the low mg/kg range. In addition, this test method covers a wide variety of metals in virgin and re-refined base oils. Twenty-two elements can be determined rapidly, with test times approximating several minutes per test specimen.
Send Email Details -
Opaque Viscometer
Reverse flow type. Used to determine the kinematic viscosity of bitumen, distillation residues of opaque liquid asphalts, asphalt cements at 135°C and road oils at 60°C. Supplied complete with calibration certificate.
Send Email Details -
Routine Viscometer
The Cannon-Fenske Opaque Viscometer measures kinematic viscosity of transparent and opaque Newtonian liquids according to ASTM D445, ISO 3104 and ASTM D2170. Minimum sample volume is 12 mL. Minimum bath depth is 230 mm (9 in). Special constant viscometers are available at additional cost. This is a calibrated viscometer which include a certificate of calibration and instruction sheet. Uncalibrated viscometers are also available. Holders are sold separately.
Send Email Details
