-
ASTM D2265 Automatic High Temperature Dropping Point Apparatus
KN-2265Z Automatic High Temperature Dropping Point Apparatus conforms to the ASTM D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range. This apparatus covers the determination of the dropping point of lubricating grease and it tests dropping points of lubricating greases at temperatures of up to 400°C.
Send Email Details -
ASTM D8288 Automatic Tapping Torque Testing System
KN-8288 Automatic Tapping Torque Testing System conforms to ASTM D8288 Standard Test Method for Comparison of Metal working Fluids Using a Tapping Torque Test Machine. This test method can be used to predict the comparative lubricating properties of a metalworking fluid (MWF). Fluids that produce lower torques or higher efficiencies are predicted to have better machining characteristics. The method is applicable to all tap types, machining speeds, alloys and coatings that can be fabricated into a test piece. Comparison between different operating conditions or various types of fluids can be made. The reportable quantity is the efficiency or mean average torque of a reference fluid divided by the mean average torque of the fluid of interest.
Send Email Details -
Energy Dispersive X-Ray Fluorescence Spectrometer
Portable Energy Dispersion X- ray Fluorescence Spectrometer This new Portable Energy Dispersion X- ray Fluorescence Spectrometer is designed for the onsite analysis of Sulfur in oils. This model fully meet onsite elements test in oils for the raw materials, production control and finished products inspections. The outstanding advantages of the XRF Light, small, one key test. The operator can perform the onsite analysis at anytime and anywhere.
Send Email Details -
NAS1638 Benchtop Oil Particle Counter
this oil particle counter equip with Built-in ISO4406,GB/T14039, NAS1638, JBT9737.1, SAE749D, GJB420A,GJB420B, DL/T1096 particulate contamination level standards and user-defined particle channel settings; can built-in required standard according to user requirements;
Send Email Details -
ASTM D2386 Automatic Freezing Point Of Aviation Fuel
The freezing point of an aviation fuel is the lowest temperature at which the fuel remains free of solid hydrocarbon crystals that can restrict the flow of fuel through filters if present in the fuel system of the aircraft. The temperature of the fuel in the aircraft tank normally falls during flight depending on aircraft speed, altitude, and flight duration. The freezing point of the fuel must always be lower than the minimum operational tank temperature
Send Email Details -
ASTM D1321 Penetration Of Waxes
the penetration test is used as a measure of consistency.higher values of penetration indicate softer cnssistency
Send Email Details -
KN-SY Circulating Water Bath
KN-SY Circulating Water Bath can be widely used in drying, concentration, distillation, impregnated chemical reagents, impregnated drugs and biological products, and can also be used for constant temperature heating in water baths and other temperature tests, and is an essential tool for biology, genetics, viruses, aquatic products, environmental protection, medicine, health, biochemical laboratories, analysis rooms, education and scientific research.
Send Email Details -
GOST 7143 Ultimate Strength and Thermostrengthening Tester
KN-7143 Ultimate Strength and Thermostrengthening Tester conforms to GOST 1743 Greases. Method for Determination of Ultimate Strength and Thermostrengthening. It is mainly used to measure the pressure of the grease when it is displaced in the threaded pipe of the plasticizer at the test temperature, and convert it into a strength limit value, which is expressed as Pa. The appearance design of the grease strength limit tester is beautiful and generous, the structure design is reasonable, the operation is convenient, and the results are accurate
Send Email Details
