-
ISO 13736 Automatic Abel Closed Cup Flash Point Tester
KN-170Z Automatic Abel Closed Cup Flash Point Tester conforms to IP170 Petroleum products and other liquids -- Determination of flash point -- Abel closed cup method and ISO 13736 Petroleum Products and Other Liquids - Determination of Flash Point - Abel Closed Cup Method and IP170 Determination of flash point - Abel closed-cup method. This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points between -30℃ and 70℃ inclusive. However, the precision given for the method is only valid for flash points in the range -5℃ to 66.5℃. This standard is not acceptable to water borne paints which may however be tested using ISO 3679
Send Email Details -
ASTM D3828 Small Scale Closed Cup Flash Point Tester
KN-3828 Small Scale Closed Cup Flash Point Tester conforms to ASTM D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester. Flash point measures the response of the test specimen to heat an ignition source under controlled laboratory conditions. It is only one of a number of properties that must be considered in assessing the overall flammability hazard of a material. Flash point is used in shipping and safety regulations to define flammable and combustible materials and classify them. Consult the particular regulation involved for precise definitions of these classes. Flash point can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material.
Send Email Details -
Double Tubes Distillation Apparatus For Petroleum Products
The basic test method of determining the boiling range of a petroleum product by performing a simple batch distillation has been in use as long as the petroleum industry has existed.
Send Email Details -
Automatic Distillation Apparatus For Petroleum Products
KN-86D Automatic Distillation Apparatus for Petroleum Products is a new designed distillation tester. It conforms to standard ASTM D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure , which is suitable for testing distillation of light and middle distillates, automotive spark-ignition engine fuels with or without oxygenates, aviation gasoline, aviation turbine fuels, diesel fuels, biodiesel blends up to 20 %, marine fuels, special petroleum spirits, naphthas,
Send Email Details -
ASTM D7345 Automatic Micro Distillation
The distillation (volatility) characteristics of hydrocarbons have an important effect on their safety and performance, especially in the case of fuels and solvents. The boiling range gives information on the composition, the properties, and the behavior of the fuel during storage and use. Volatility is the major determinant of the tendency of a hydrocarbon mixture to produce potentially explosive vapors.
Send Email Details -
ASTM D1160 Distillation Of Petroleum Products At Reduced Pressure
The sample is distilled at an accurately controlled pressure between 0.13 and 6.7 kPa (1 and 50 mm Hg) under conditions that are designed to provide approximately one theoretical plate fractionation. Data are obtained from which the initial boiling point, the final boiling point, and a distillation curve relating volume percent distilled and atmospheric equivalent boiling point temperature can be prepared.
Send Email Details -
ASTM D4006 Water In Crude Oil By Distillation
The sample is heated under reflux conditions with a water immiscible solvent which co-distills with the water in the sample. Condensed solvent and water are continuously separated in a trap—the water settles in the graduated section of the trap, and the solvent returns to the distillation flask
Send Email Details -
ASTM D95 Water In Petroleum Products And Bituminous Materials By Distillation
A knowledge of the water content of petroleum products is important in the refining, purchase, sale, and transfer of products.
Send Email Details
