-
ASTM D92 Manual Cleveland Open Cup Flash Point Tester
Flash point is used in shipping and safety regulations to define flammable and combustible materials. Consult the particular regulation involved for precise definitions of these classifications.
Send Email Details -
ASTM D92 Automatic Cleveland Open Cup Flash Point Tester
Flash point can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material. For example, an abnormally low flash point on a test specimen of engine oil can indicate gasoline contamination
Send Email Details -
ASTM D92 Automatic Cleveland Open Cup Flash Point Tester (Electric ignition)
KN-92E Automatic Cleveland Open Cup Flash Point Apparatus, conforms to ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester, is applicable to all petroleum products with flash points above 79°C (175°F) and below 400°C (752°F) except fuel oils.
Send Email Details -
Manual Pensky-Martens Closed Cup Flash Point Tester
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
Send Email Details -
Automaitc Pensky-Martens Closed Cup Flash Point Tester
The flash point temperature is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties which must be considered in assessing the overall flammability hazard of a material
Send Email Details -
ASTM D93 Automatic Pensky-Martens Closed Cup Flash Point Tester Electronic Ignition
KN-93E Automatic Pensky-Martens Closed Cup Flash Point Tester conforms to ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to test for those liquids which have a kinematic viscosity of 5.8mm2/s (cSt) or more at 37.8℃ or 9.5mm2/s (cSt) or more at 25℃ (77℉), or that contain suspended solids, or have a tendency to form a surface film while under test. These departments for liquids using these test methods have established other classification flash points.
Send Email Details -
ASTM D56 Tag Closed Cup Flash Point Tester
this apparatus conforms to ASTM D56 Standard Test Method for Flash Point by Tag Closed Cup Tester, it is used for flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104℉ (40℃) or below 9.5cSt at 77℉ (25℃),
Send Email Details -
IP170 Abel Flash Point Tester
This International Standard specifies a method for the determination of the closed cup flash point of petroleum products and other liquids having flash points between -30℃ and 70℃ inclusive.
Send Email Details
