ASTM D2270 Calculating Viscosity Index From Kinematic Viscosity At 40 And 100°C
Brand KN
Product origin Dalian,China
Delivery time deliver as soon as received payment
Supply capacity 30 sets one month
The viscosity index is a widely used and accepted measure of the variation in kinematic viscosity due to changes in the temperature of a petroleum product between 40 and 100°C.
A higher viscosity index indicates a smaller decrease in kinematic viscosity with increasing temperature of the lubricant.
The viscosity index is used in practice as a single number indicating temperature dependence of kinematic viscosity.
Viscosity Index is sometimes used to characterize base oils for purposes of establishing engine testing requirements for engine oil performance categories
KN-2270 Viscosity Index Bath
Overview
KN-2270 Viscosity Index Bath conforms to the ASTM D2270 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°C, it covers the procedures for calculating the viscosity index of petroleum products, such as lubricating oils, and related materials from their kinematic viscosities at 40 and 100°C.
Features
The instrument adopts advanced single-chip intelligent temperature control, timely temperature display working status such as time and other parameters;
It has outer Plexiglas insulation cover with uniform temperature distribution in the bath, which has good temperature control effect;
Four samples can be simultaneously used for the test, which makes the experiment faster and more convenient;
The heater and other components are made of stainless steel that is resistant to corrosion and durable. It has LED lighting with long service life and is easy to observe;
The capillary meter card adopts three-point vertical type, which is flexible and convenient to operate with tight clamping.
Automatic calculation of kinematic viscosity values and test averages, and automatic printing and storage of measurement results;
The number of experiments can be freely adjusted for 1-6 times, and parallel experiments can be performed on two or more oil samples at the same time.
Technical Parameters
Display | English LCD display |
Temperature control range | Arbitrarily set from room temperature to 110 °C |
Temperature control accuracy | ±0.01 °C or ±0.1 °C, optional |
Timing accuracy | ±0.1S |
Timing range | 0.1S-999.9S |
Thermostatic bathtub | 250×250mm |
Sampling number | 4 |
Working environment | Ambient temperature:15--35℃;ambient humidity< 85% |