-
KN-40A Channel Point Tester for Gear Oil
KN-40A Channel Point Tester for Gear Oil conforms to FTMS-791B-3465.1 and SH/T 0030. It is used for determination of channel point of gear oil at low temperature. The test consists of storing an Oil sample for 18 hours at a low temperature, cutting a channel in the lubricants with a metal strip and determining whether the lubricants flow together to covet the bottom of the container within 10 seconds.
Send Email Details -
Full Automatic Pour and Cloud Point Tester
KN-9725 Automatic Pour and Cloud Point Tester developed for classic determination of cloud point (CP) and pour point (PP) of petroleum products according to ASTM D97, ASTM 2500, EN 23015, ISO 3015, ISO 3016, IP 15,. KN-9725 determines CP and PP in one test cycle with high precision in compare with manual methods. Unique integrated cooling system provides cooling of samples up to -80°С in a short time without any external chiller.
Send Email Details -
Metal Bath Pour and Cloud Point Tester
KN-97J Metal Bath Pour and Cloud Point Tester is suitable to the standards of ASTM D97 Standard Test Method for Pour Point of Petroleum Products and ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products, It is used to test the pour and cloud point of petroleum products.
Send Email Details -
ASTM D446 Full Automatic Viscometer Cleanser
This Ultrasonic capillary viscometer cleaner is used for cleaning the capillary viscometers,such as opaque, routine, Ubbelohde, or Pinkevitch viscometers.
Send Email Details -
ASTM D1404 Deleterious Particles In Lubricating Grease
The significance of the number of scratches as far as correlation with field performance is concerned has not been established. A particle which is abrasive to plastic will not necessarily be abrasive to steel or other bearing materials. Some correlation was obtained in that the contaminant used in Sample 3 had a greater wear rate in a laboratory ball bearing abrasive wear test than the contaminant in Sample 2.
Send Email Details
