ASTM D56 Tag Closed Cup Flash Point Tester

KN-56Z Automatic Tag Closed Cup Flash Point Apparatus

Overview

    KN-56Z Automatic Tag Closed Cup Flash Point Apparatus conforms to ASTM D56 Standard Test Method for Flash Point by Tag Closed Cup Tester. It is usedd for flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104℉ (40℃) or below 9.5cSt at 77℉ (25℃), and a flash point below 200℉ (93℃) except cut-back asphalts, those liquids which tend to form a surface film under test conditions and materials which contain suspended solids. We use gas supply for the apparatus, gas circuit adopts stainless steel pipe, anti-aging， constant using. The instrument is highly automated with simple operation and accurate results. The instrument is equipped with two Danfoss compressore as cooling system, test lowest flash point temperature can reach minus 50 degree.

Features

1. Fast refrigerating speed, big depth, cold do -50℃ oil sample test

2. From room temperature to -60℃ just needs 30min

3. Realize slope temperature rising， 3℃/min, 1℃/min

4. Equips with liquid level overflow port and liquid adding port

5. Glass PT100, temperature sensing rate is same as thermometer

6. Touch screen operation, thermal printer， store thousands of data

7. Equips unkonw flash point detection

8. Ion ring detects flash point automatically, ON/Off scribing ignition automatically

Technical parameters

1. Rated voltage: AC220V±10%， 50Hz
   

2. Power: 1500W

3. Operation way: Touch LCD

4. Test temperarture: -40~70℃

5. Ignition gas source: Pipelined gas or LPG, which pressure is less than 10Kpa

6. Printer: Thermal printer

7. Cooling mode: Double compressor refrigeration

8. Ambient requirements: Temperature 10~40℃, Humidity≤85%

9. Net dimension: 560*600*660mm, 45kg