-
ASTM D36 Automatic Bitumen Softening Point of Asphalt (Ring-and-Ball)
KN-36 Apparatus for Softening Point of Asphalt (Ring-and-Ball Test apparatus) conforms to the ASTM D36 Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus). The apparatus covers the determination of the softening point of bitumen in the range from 30 to 160°C [86 to 320°F] using the ring-and-ball apparatus immersed in distilled water [30 to 80°C] or USP glycerin (above 80 to 160°C).
Send Email Details -
ASTM D1742 Oil Separation From Lubricating Grease
When a lubricating grease separates oil, the remaining composition increases in consistency. This can affect the ability of the product to function as designed
Send Email Details -
ASTM D4059 GC for PCBs in Insulating Liquids
KN-4059 GC for PCBs in Insulating Liquids conforms to ASTM D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography. This test method describes a quantitative determination of the concentration of polychlorinated biphenyls (PCBs) in electrical insulating liquids by gas chromatography. It also applies to the determination of PCB present in mixtures known as askarels, used as electrical insulating liquids.
Send Email Details -
Sulfur and Chlorine Microcoulometric Titrator
Injected into quartz tube and mixed with O2, the sample burns .Then the combustion gases are routed into a titration cell and react with I3- or Ag+ . Then the analyzer detects and adds I3- or Ag+ to original concentration. In accordance with Faraday's laws of electrolysis, the detector module calculates energy they consumed and thus gets the concentration of sulfur or chlorine.
Send Email Details -
ASTM D36 Softening Point Of Bitumen
Two horizontal disks of bitumen, cast in shouldered brass rings, are heated at a controlled rate in a liquid bath while each supports a steel ball. The softening point is reported as the mean of the temperatures at which the two disks soften enough to allow each ball, enveloped in bitumen, to fall a distance of 25 mm (1.0 in.)
Send Email Details -
Apparatus for Chlorine in Aromatics
KN-7536 Apparatus for Chlorine in Aromatics conforms to ASTM D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry. This test method provides for the precise measurement of the chlorine content of aromatics with minimal sample preparation and analyst involvement. The typical time for each analysis is five or ten minutes. Knowledge of the chlorine content of aromatics is important for process control as well as the prediction and control of operational problems such as unit corrosion and catalyst poisoning, and in the blending of products to commodity specifications. Various federal, state, and local agencies regulate the chlorine content of some petroleum products, including aromatics. Unbiased and precise determination of chlorine in aromatics is critical to compliance with regulatory standards.
Send Email Details -
ASTM D1263 Leakage Tendencies Of Automotive Wheel Bearing Greases
The test method provides a screening device that permits differentiation among products having distinctly different leakage characteristics. It is not the equivalent oflongtime service tests, nor is it intended to distinguish between wheel bearing greases showing similar or borderline leakage
Send Email Details -
ASTM D4290 Leakage Tendencies Of Automotive Wheel Bearing Grease
This apparatus differentiates among wheel bearing greases having distinctly different high-temperature leakage characteristics. It is not the equivalent of longtime service tests
Send Email Details
